Author: butcher

combustion engine are gone

Petrol and diesel engines are in the past. The market of hybrid and fully electrical vehicles growing huge from day to day. But we still have time to enjoy the smell of the diesel exhaust in a next few decades.
We are happy that e-cars need weight reduction which can be aPetrol and diesel engines are in the past. The market of hybrid and fully electrical vehicles growing huge from day to day.chieved by using composite materials

Auto Exotica 2019

Installation manual for BMW X5 F15 Carbon Fiber M Performance

BMW X5 F15 ( non LCI )

Equipped with M Sport package ( can be found here )

Following installation manual describes how to install : M Performance Carbon fiber bodykit for F15/MSport

First of all – all test fits and etc must be done with a bolt UNSCREWED from the lower part of bumpers – otherwise you will see that items are “bent and my super skilled professional says that it’s important to install it”

All surfaces must be cleaned with cleanser/degreaser

Front lip installation :

Install brackets / supporting frame ( drill two holes in brackets – holes are not predrilled because every front bumper have a little different size and shape ) by unscrewing two bolts from each lower side of front bumper – fasten brackets using two existing bolts and screw it to bumper ( upper part  ) – see pictures 1-2

Install front lip – sand the lip and brackets, drill holes in front lip – that holes must line up to car’s holes. Apply adhesive on a perimeter of the front lip then install it on to prepared front bumper, fasten lower bolts and fasten&tighten the lip using scotch tape – see pictures 2-8

Diffuser installation :

Apply adhesive on a perimeter of the whole diffuser like it’s shown on pictures then install it on to prepared rear bumper, fasten lower bolts and fasten&tighten the diffuser using scotch tape – see pictures

Rear flaps installation :

Align flaps like you wish – mark the places to drill the holes – drill holes, install using bolts

Mirror caps installation :

Remove the protection tape and stick the cover to your mirror caps

BMW X6 E71 rear diffuser installation manual

BMW X6 E71 Diffuser installation

Level : Easy

Tools : Screwdriver to remove old diffuser and to install new on. Drill to drill holes in new diffuser

Please unscrew 3 bolts which are holding diffuser from bottom then gently pull it

 

Click in the new diffuser / drill holes and screw it to the bottom of the bumper

BMW X6 E71 P-Performance front bumper lip installation

BMW X6 E71 P-Performance front bumper lip installation

Installation is very easy – you need

a) hands

b) screwdriver

c) two screws

  1. Please center-line the lip so the left and right sides of the lip line up to the bumperimg_6154
  2. Ask for assistance ( or fasten lip using adhesive ) with drilling/screwdriver and fasten lip using one screw on the left and one on the righimg_6155

 

BMW X6 E71 Front bumper flaps installation

Installation manual for BMW X6 E71 Front bumper flaps

  1. Please unscrew two screws under the bumper ( two left and two right )

img_6148

2) Do a test fit of the flap and drill holes – we do not predrill holes because all front bumpers are deformed !! Once holes are drilled – do a test fit and you will see that inner side of the flap won’t line up to the bumper without pressur

img_6152 img_6149

3) Apply adhesive on a inner side of the flap and fasten it so adhesive can curdle ( DO NOT USE SEALANTS OR 3M TAPE )

img_6151

HGK 10th Anniversary Drift Challenge

« 2 of 2 »

Installation manual BMW X6 F16 Carbon Fiber M-Performance bodykit

Installation manual for Bodykit – BMW F16 Carbon Fiber M-Performance bodykit

Bodykit can be found here

For installation you will need:

1) Hands

2) Adhesive/glue and a gun

3) Metallic rivets and a gun for it ( or screws )

4) Paper scotch tape

5) Electronic drill to drill correct holes for rivets

Front lip installation process

Required : 2) 3) 4) 5)

Do a test fit to find out how the lip must be installed to a front bumper. Please use brackets ( supplied with carbon fiber bodykit ONLY ) – you need to drill holes and fasten brackets to the lower part of the front bumper. Brackets are required to hold the front lip. Lower lip must be attached/fastened to a lower part of the bumper using existing bolts

 SAM_2588          Apply adhesive to a bracket – it will hold/adhesive front lip to the bumper/brackets ! SAM_2594  SAM_2568

If the holes is not predrilled in the front lip – please drill it and right after install the front lip : upper part must match the brackets and lower part must be screwed/fastened to a bumper

SAM_2597 SAM_2569

Rear diffuser/lip and side flaps installation

  Required2) 3) 4) 5)

Do a test fit on both sides there are places for rivets/screws – drill it and install rivets ( install rivets only AFTER the lip is prepared for installation using adhesive)

Prepare the diffuser in accordance to method provided by adhesive manufacturer

SAM_2534

For a better fixation apply adhesive all around the inner perimeter

SAM_2537

Istall the diffuser and fasten in underneath the car using screws/bolts

SAM_2539

SAM_2542

“Ears” or side flaps –  must be installed using adhesive and existing bolts

SAM_2562

SAM_2532

Rear spoiler and mirror covers installation

  Required  2) 3) 4) 5)

Apply adhesive all around the inner perimeter, install the spoiler/mirror covers and fasten it with scotch tape for a 24h

Spoiler :

SAM_2561

Mirro covers :

SAM_2574

SAM_2577

ENJOY

SAM_2621

SAM_2623

Translate »